{"product_id":"dual-plate-two-camera-head-arm-sta-01-398dat","title":"Dual Plate Two Camera Head Arm STA-01-398DAT","description":"\u003cp\u003eThe STA-01-398DAT is a clamp-on extension arm with two clamp plates and two adjustable camera head mounts. This option provides a third and a fourth camera head mount plate. Two clamp plates increases rigidity of the extension arms.\u003c\/p\u003e\n\u003cp\u003eIt is designed to be quickly clamped onto the horizontal arm, in multiple positions:\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePositioned above the horizontal arm to raise the height of the stand.\u003c\/li\u003e\n\u003cli\u003ePositioned below the horizontal arm to shoot at ground level.\u003c\/li\u003e\n\u003cli\u003ePositioned in front of the horizontal arm to shoot over a table or object.\u003c\/li\u003e\n\u003cli\u003ePositioned behind the horizontal arm to shoot over a table or object.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eThe clamp-on extension arm can also be mounted with the arm facing towards the vertical column or away from the vertical column. When the arm is mounted away from the vertical column it extends the length of the horizontal arm, which is useful for overtable photography.\u003c\/p\u003e\n\u003cp\u003eWhen used with the STA 01-360\/MK2 \u0026amp; STA 01-350\/MK2 camera stands it provides extended shooting range below and above the horizontal arm\/bar. When mounted for low position shooting it lowers the minimum range by approximately 28cm \/11 in. With the STA-01-398DAT arm installed on the STA 01-360 MK2 or the STA 01-350 MK2 the minimum working height is lowered to 22cm \/ 8.6 inches from the floor.\u003c\/p\u003e\n\u003cp\u003eWhen mounted for high position shooting it raises the upper range by approximately 28cm \/11 in. With the STA-01-398DAT arm installed on the STA 01-360 MK2 the maximum working height is raised to 208cm \/ 79.5 inches from the floor. With the STA-01-398DAT arm installed on the STA 01-350 MK2 the maximum working height is raised to 248cm \/ 97.6 inches from the floor. The STA-01-398DAT arm can be clamped onto either side of the camera stands horizontal arm.\u003c\/p\u003e\n\u003cp\u003eThe STA-01-398DAT clamp-on extension arm can be mounted onto the camera stands horizontal arm in the following positions: 0 degrees pointing up, 60 degrees pointing forward, 120 degrees pointing forward and downward, 180 degrees pointing down, 240 degrees pointing backward and downward, 300 degrees pointing backward and upward. The circular tube can be mounted on either side of the clamp plate pointing toward the center column or away from the center column.\u003c\/p\u003e\n\u003cp\u003eThe Camera Head Mount Plate can be re-positioned using the hand lever. It can be re-positioned anywhere from 0-360 degrees around the circular arm.\u003c\/p\u003e\n\u003cp\u003eCompatible Camera Stands:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSTA-01-360MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-360 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350MK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-C01-350-TRI [*see note regarding reduced loading]\u003c\/li\u003e\n\u003cli\u003eSTA-01-350RMK2 [*see note regarding reduced loading]\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e*CAUTION: \u003c\/strong\u003eWhen using the STA-01-398DAT the load capacity [camera, etc.] must be reduced.\u003c\/p\u003e\n\u003cp\u003eThe nominal load capacity must be reduced by using the following formula:\u003c\/p\u003e\n\u003cp\u003e(STA supplied published stand load capacity \/ (300mm + Length of originally supplied STA Horizontal Arm\/Bar in mm )\/ (Length of originally supplied STA Horizontal Arm\/Bar in mm)) = new full extension load capacity\u003c\/p\u003e\n\u003cp\u003e( STA-C01-360= 10kg ) \/ (300mm+700mm \/ 700mm ) = 7 Kg \/ 15.4 lbs\u003c\/p\u003e\n\u003cp\u003eSome assembly is required, please review the set-up \u0026amp; use manual. Hex key tools are included to complete assembly.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1568\/5511\/files\/STA_01-398_Lowering_Plate_Set-up_manual_March_22_2022.pdf?v=1648070128\" rel=\"noopener\" target=\"_blank\"\u003e\u003cspan\u003eSTA 01-398 Lowering Plate Set-up \u0026amp; Use Manual\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e* Before installation and use of the STA-01-398DAT arm please read the manual. When using the STA-01-398DAT arm, consideration for load reduction and using additional weights \/ sand bags on the legs of the base are required to prevent instability or a tip over.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProduct Update\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eStudio Titan reserves the right to make product changes and improvements as required. As a result the product supplied may not be exactly as pictured or specified.\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e","brand":"STUDIO TITAN EUROPE","offers":[{"title":"Default Title","offer_id":45226324623537,"sku":null,"price":999.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0684\/7181\/6369\/files\/Studio-Titan-01-398DAT-1.jpg?v=1749914441","url":"https:\/\/studiotitaneurope.com\/products\/dual-plate-two-camera-head-arm-sta-01-398dat","provider":"STUDIO TITAN EUROPE","version":"1.0","type":"link"}